HDBaseT Power Injector
HDC-P1502

Slide thumbnail
Slide thumbnail

Shipping Status: Available
  • Connector.

    Supply Power to HDBaseT Units

    Supplies power to a PoH transmitter and receiver,such as HDC-TH100WP

  • Connector.

    4K@60 & HDCP1.4/2.2

    Supports resolutions up to 4K at 60 frames per second

  • Connector.

    Extend to 330 ft. / 100 m

    Pair with IDK HDBaseT receivers to extend up to 333ft / 100m

The HDC-P1502 is a single port power injector that supplies power to a PoH transmitter and receiver, such as HDC-TH100WP (Wall-plate HDMI twisted pair cable transmitter). Since the injector provides power to a transmitter and receiver (up to 15 W per device) simultaneously by installing within the HDBaseT transmission line, it eliminates the need for a local power supply. The HDC-P1502 stops supplying power if detecting PoH incompliant, twisted pair cable’s short, overload, and heat problem.

Input

  • 1 Input
    • PoH power supply (PSE) (equivalent to IEEE802.3af) (*2)
    • Connector: RJ-45

Output

  • 1 Output
    • PoH power supply (PSE) (equivalent to IEEE802.3af) (*2)
    • Connector: RJ-45

MISC

  • Cat5e UTP / STP, Cat6 UTP / STP, CAT.5E HDC cable
  • The distance may be 10% shorter than the shorter one of transmitter / receiver and transmitter / sink device.
  • Power
    • AC adapter
      • Input: 100-240 VAC ± 10 %, 50 Hz / 60 Hz ± 3 Hz
      • Output: 12 VDC 3 A (AC adapter is supplied)
  • Power consumption
    • About 32 Watts
  • Dimensions: 4.2 (W) × 1.1 (H) × 3.9 (D)” (106 (W) × 27.5 (H) × 100 (D) mm) (Excluding connectors and the like)
  • Weight: 0.7 lbs. / 0.3 kg
  • Temperature
    • Operating: 32° F to 104° F / 0° C to +40° C
    • Storage: -4° F to +176° F / -20° C to +80° C
  • Humidity
    • Operating / Storage: 20% to 90% (non-condensing)
  • (*1) The maximum resolution: 4K@60 (4:2:0), HDCP 1.4 / 2.2 (Pass through)
  • (*2) Please use a transmitter / receiver supporting PoH power receiving function (PD) (equivalent to IEEE 802.3af).
  • (*3) T568A or T568B straight wiring CAT.5E HDC cable is developed by IDK and meets requirements set by the HDBaseT alliance. Twisted pair that is thicker than AWG 24 is recommended for supplying power.

coming soon