Digital Frame Synchronizer/Scaler
DFS-01UHD

Slide thumbnail
Slide thumbnail

Shipping Status: Available
  • Connector.

    Up/down scaling

    Supports resolution up to 4K@60 4:4:4 & HDCP 1.4/2.2

  • Connector.

    4K Video Rotation

    Supports 180 degree for 4K and 90/180/270 degree for 1080p

  • Connector.

    External Sync Signal

    Supports external sync signal & frame delay for videowall application

The DFS-01UHD is a 1×1 digital frame synchronizer with a scan converter.

For video input, 1 digital input is included and HDMI or DVI signals can be input. Input video signal is converted and output at a resolution up to 4K@60.
Audio volume can be controlled. The lip sync function corrects the gap between the video and audio.

The DFS-01UHD also has a LAN port as communication ports for control to enable external control and remote setting.

Input

Video
  • 1 Input
    • HDMI Deep Color (*1) / DVI 1.0
    • TMDS single link
    • HDCP 1.4 / 2.2
    • CEC (Pass through)
    • EDID emulation
    • Connectors: female HDMI Type A (19-pin)
  • VGA to WQXGA
  • 480i / 480p / 576i / 576p / 720p / 1080i / 1080p / 4K (4K@60 (4:4:4)) (*2)
  • Dot clock: 25 MHz to 300 MHz
  • TMDS clock: 25 MHz to 300 MHz
  • TMDS data rate: 0.75 Gbps to 18 Gbps
Audio
  • 1 Input
    • Multi-channel linear PCM up to 8 channels
    • Sampling frequency: 32 kHz to 192 kHz
    • Sample size: 16 bit to 24 bit
    • Reference level: -20 dBFS
    • Max input level: 0 dBFS
    • Connectors: female HDMI Type A (19-pin)

Output

Video
  • 1 Output
    • HDMI Deep Color (*1) / DVI 1.0
    • TMDS single link
    • HDCP 1.4 / 2.2
    • CEC (Pass through)
    • Connectors: female HDMI Type A (19-pin)
  • VGA / SVGA / XGA / WXGA (1280×768) / WXGA (1280×800) / Quad-VGA / SXGA / WXGA (1360×768) / WXGA (1366×768) / SXGA+ / WXGA+ / WXGA++ / UXGA / WSXGA+ / VESAHD / WUXGA / QWXGA / WQHD / WQXGA
    • VESAHD / WUXGA / QWXGA / WQHD / WQXGA  output as Reduced Blanking
  • 480p / 576p / 720p / 1080i / 1080p / 4K (3840 x 2160) / 4K (4096 x 2160)
  • TMDS clock: 25.175 MHz to 297 MHz
  • TMDS data rate: 0.755 Gbps to 17.82 Gbps
Audio
  • 1 Output
    • Multi-channel linear PCM up to 8 channels
    • Sampling frequency: 32 kHz to 192 kHz
    • Sample size: 16 bit to 24 bit
    • Connector: female HDMI Type A (19-pin)

Other Info

MISC
  • 1 Input/Output
    • SYNC, CLK
    • Level: TTL
    • Connector: BNC
    • External sync signal only for IDK’s DFS-01HD/UHD
  • Digital Input: 1080p@60: 98.4 ft. (30 m) / 4K@60: 39.4 ft. (12 m) (*4)
  • Digital Output: 1080p@60: 98.4 ft. (30 m) / 4K@60: 39.4 ft. (12 m) (*4)
  • Motion adaptive Interlace/Progressive conversion
  • Aspect ratio control
  • Video rotation (*5)
  • Video flip
  • Image adjustment (brightness, contrast, position, size (*6))
  • All settings are available on Web browser
  • Audio level adjustment
  • Lip Sync (up to 16 frame)
  • Preset memory (16 memories) / Last memory
  • Anti-snow (*7)
  • Connection Reset (*8)
  • Operation lock
  • Health check
External Control
  • 1 Port
    •  10Base-T, 100Base-TX , 1000Base-TX (Auto neg.), Auto MDI/MDI-X
    • Connector: RJ-45
Others
  • Power: 100-240 VAC ± 10%, 50Hz/60Hz ± 3Hz
  • Power consumption: About 27 Watts
  • Dimensions: 8.27″ x 1.73″ x 9.84″ / 210 mm (W) x 44 mm (H) x 250 mm (D)
  • Rack size: 1/2U (not including projections)
  • Weight: 4.18 lbs / 1.9kg
  • Temperature
    • Operating: 32° F to 104° F / 0° C to +40° C
    • Storage: -4° F to +176° F / -20° C to +80° C
  • Humidity: Operating / Storage 20% to 90% (non-condensing)
  • (*1) 30 bit / pixel (10 bit / component) Deep Color is supported while x.v.Color, 3D, ARC and HEC are not supported. 4K format: 24 bit / pixel (8 bit / component) is supported.
  • (*2) 4K format: Only CEA-861 timing is supported.
  • (*3) Does not support 1080i video format.
  • (*4) The maximum cable distance varies depending on the connected devices and was measured under following conditions:
    • 1080p@60: when IDK’s AWG 24 cable was used and signals of 1080p@60 24 bit / pixel (8 bit / component) was input or output.
    • 4K@60 : when IDK’s 18 Gbps supported cable was used and signals of 4K@60 24 bit / pixel (8 bit / component) was input or output. The maximum cable distance depends on the connected devices. The distance may not be extended with some device combinations, cabling method, or other manufacturer’s cable. Video may be disturbed or may not be output even if signals are within the range mentioned above.
  • (*5) 4K formats and resolution exceed 165 MHz support only 180 degree video rotation.
  • (*6) Size can be adjusted when the video rotation setting is 0 or 180 degree.
  • (*7) The anti-snow feature automatically fixes snow noise that is a specific symptom of HDCP-compliant signals and mainly occurs at start-up. This feature does not work when snow noise has already occurred during startup or when it occurs due to a bad condition of the transmission line.
  • (*8) For digital systems, some problems, such as an HDCP authentication error, can often be recovered by physically disconnecting and reconnecting the digital cables. However, the Connection Reset feature will fix these problems automatically without the need to physically plug and unplug the cables. It creates the same condition as if the cable were physically disconnected and reconnected. This feature only works for the DFS’s output. If other devices are connected between the DFS’s output and sink device, this feature may be invalid.
Coming Soon