Digital Multi Switcher
MSD-701AMP

Slide thumbnail
Slide thumbnail

Shipping Status: Available
  • Connector.

    7 Inputs / 1 Output

    Inputs: HDMI x 5, HDBaseT x 1, Digital & Analog Universal x 2 / Outputs: HDMI x 2, HDBaseT x 1

  • Connector.

    Picture-in-Picture

    Combine 2 videos into one for viewing on a single screen, and provide dynamic layout.

  • Connector.

    Built-in DSP, audio mixer & amplifier

    Provide volume adjustment and mixing between source and microphone, and output to speaker.

The IDK MSD-701AMP is a high-performance digital multi switcher with a scan converter, audio amplifier, and up to 7 inputs and 1 output.

For video input, 7 digital and 2 analog inputs are included and the following signals are supported: HDMI, DVI, HDBaseT, composite video, Y/C, analog RGB, and analog YPbPr signals. Input video signals are converted to HDMI and HDBaseT signals simultaneously, and output as 1×3 distributed output signal at a resolution up to QWXGA / 1080p.

For audio input, 7 digital and 3 analog inputs are included. Selected audio signals can be mixed with one line and one microphone audio. Those signals are output to digital audio, analog audio, and speaker. Audio level of each input can be set individually. The lip sync function corrects the gap between the video and audio.

This switcher also has RS-232C and LAN ports as communication ports for control to enable you to set menus remotely. You can also control external devices that are connected to the MSD-701AMP over RS-232C, LAN, CEC, or contact closure by registering external control commands. The waiting function helps you to send external commands after cooling time passes as power supply control of projectors or the like. External control commands can be executed from front keys, RS-232C, or LAN; they can also be executed when input channel selection keys or power supply key is operated.

Input

Video
  • 7 Inputs * DVI-I connectors: Switch-selectable between digital and analog
    • HDMI Deep Color (*1) / DVI 1.0
    • HDCP 1.4
    • TMDS single link
    • TMDS clock: 25 MHz to 225 MHz
    • TMDS data rate: 0.75 Gbps to 6.75 Gbps
    • EDID emulation
    • Digital cable equalizer
    • CEC
  • Connector:  Female HDMI Type A (19-pin) x 5,  Female DVI-I (29-pin) x 2
  • 1 Input * Switch-selectable between HDMI and HDBaseT
    • HDBaseT (*1)
    • HDCP 1.4
    • EDID emulation
    • RS-232C, LAN, and CEC
    • PoH power supply (IEEE 802.3af)
  • Connector:  RJ-45 x 1 (*2)
  • Cable: Cat5e UTP / STP, Cat6 UTP / STP, CAT.5E HDC cable
    • 2 Inputs *Switch-selectable between digital and analog
      • Composite video / Y/C / Analog RGB / Analog YPbPr (auto-recognition)
      • Composite video (VBS Signal): 1.0 V [p-p] / 75 Ω, Y/C: 1.0 V [p-p] (Y) / 0.286 V [p-p] (C) / 75 Ω
      • Analog RGB: 0.7 V [p-p] (1.0 V [p-p] Sync on Green) / 75 Ω, HS/VS TTL level, CS TTL level, Sync on Green
      • Analog YPbPr: 1.0 V [p-p] (Y) / 0.7 V [p-p] (Pb/Pr) / 75 Ω
      • EDID emulation
    • Connector: Female DVI-I (29-pin)
    Video Formats
    • VGA to QWXGA (Dot clock 25 MHz to 165 MHz)
      • WUXGA / QWXGA, only Reduced Blanking is supported
    • 480i / 480p / 576i / 576p / 720p / 1080i / 1080p
    • VGA to QWXGA (Dot clock 25 MHz to 165 MHz)
      • WUXGA / QWXGA, only Reduced Blanking is supported
    • NTSC / PAL
    • 480i, 480p, 576i, 576p, 720p, 1080i, 1080p
    Audio
    • 7 Inputs *Switch-selectable between analog audio
      • Multi-channel linear PCM up to 8 channels
      • Sampling frequency: 32 kHz to 192 kHz
      • Sample bit: 16 bit to 24 bit
      • Reference level: -20 dBFS
      • Max input level: 0 dBFS
    • Connectors: Female HDMI Type A (19-pin) x 5,  Female DVI-I (29-pin) x 2
    • 3 inputs
      • Stereo LR balanced / unbalanced signal
      • Input impedance: 48k Ω Balanced signal / 24 kΩ Unbalanced signal
      • Reference level: -10 dBu
      • Max. input level: +10 dBu
    • Connector: Terminal block (5-pin)
    • 1 input
      • Stereo LR balanced / unbalanced signal
      • Input impedance: 48k Ω Balanced signal / 24 kΩ Unbalanced signal
      • Reference level: 0 to-40 dBu
      • Max. input level: +10 dBu
    • Connector: Terminal block (5-pin)
    • 1 input
      • Monaural balanced / unbalanced signal
      • Input impedance: more than 10k Ω
      • Reference level: 0 to -60 dBu
      • Max. input level: +10 dBu
    • Connector: Terminal block (3-pin)

    Output

    Video
    • 2 Outputs *Output video can be distributed to an HDMI / DVI and HDBaseT simultaneously.
      • HDMI Deep Color (*1) / DVI 1.0
      • HDCP 1.4
      • TMDS single link
      • TMDS clocks: 27 MHz to 202.5 MHz
      • TMDS data rate: 0.81 Gbps to 6.075 Gbps
      • Digital cable equalizer
      • CEC
    • Connector: Female HDMI Type A (19-pin) x 2
    • 1 Output *Output video can be distributed to an HDMI / DVI and HDBaseT simultaneously.
      • HDBaseT (*1)
      • HDCP 1.4
      • RS-232, LAN, and CEC
      • PoH power supply (IEEE 802.3af)
    • Connector: RJ-45 (*2)
    • Cable: Cat5e UTP / STP, Cat6 UTP / STP, CAT.5E HDC cable
    Video Formats
    • XGA / WXGA (1280×768) / WXGA (1280×800) / Quad-VGA / SXGA / WXGA (1360×768) / WXGA (1366×768) / SXGA+ / WXGA+ / WXGA++ / UXGA / WSXGA+ / VESAHD / WUXGA / QWXGA
      • VESAHD / WUXGA / QWXGA, only Reduced Blanking is supported.
    • 480i / 480p / 576i / 576p / 720p / 1080i / 1080p
    Audio
    • 1 Output *Audio can be distributed to an HDMI output and an HDBaseT output simultaneously.
      • Multi-channel linear PCM up to 8 channels
      • Sampling frequency: 32 kHz to 192 kHz
      • Sample bit: 16 bit to 24 bit
      • Reference level: -20 dBFS
      • Max output level: 0 dBFS
    • Connector: Female HDMI Type A (19-pin) x 2, RJ-45 x 1
    • 1 Output
      • Stereo LR balanced and unbalanced signals
      • Output impedance: 100 Ω balanced signal / 50 Ω unbalanced signal
      • Reference level: -10 dBu
      • Max. output level: +10 dBu
    • Connector: Terminal block (5-pin)
    • 1 Output
      • Stereo LR
      • Impedance: 4 to 16 Ω, 100 W + 100 W (4 Ω 1 kHz)
    • Connector: Terminal block 5.08 mm (4-pin)
    • 1 Output * Switch-selectable between Stereo LR and Monaural
      • Stereo LR
        • Impedance: 4 to 16 Ω, 100 W + 100 W (4 Ω 1 kHz)
        • Connector: Terminal block 5.08 mm (4-pin)
      • Monaural
        • High impedance output
        • Impedance: 200 Ω to 10 kΩ, 50 W TBD (200 Ω  100 V line)
        • Connector: Terminal block 5.08 mm (2-pin)

    Misc

    Signal Transmission Distance
    • HDMI / DVI: up to 98 ft. (30m) (1080p@60) (*3)
    • HDBaseT: up to 328 ft. (100 m), up to 492 ft. (150 m) (Long Reach Mode) (*4)
    • HDMI / DVI: up to 164 ft. (50m) (1080p@60) (*3)
    • HDBaseT: up to 328 ft. (100 m), up to 492 ft. (150 m) (Long Reach Mode) (*4)
    Functions
    • I/P conversion
    • Aspect Ratio Control
    • Picture adjustment (brightness, contrast, display position, display size)
    • Seamless Switching
    • Picture-in-picture
    • Audio level adjustment
    • Microphone volume adjustment
    • Source volume adjustment
    • Lyp Sync ( up to 128 ms)
    • Microphone mixing
    • Audio effect
    • All function settings through browser
    • Auto input detection and switching
    • Audio breakaway enables independent audio and video switching
    • Cross-point memory (storage for 9 settings)
    • Preset memory (8 settings and startup settings)
    • Last memory
    • Anti-Snow
    • Connection Reset
    • External control commands (32 commands)
    • Operation Lock
    • Standby power
    External Control
    • 2 ports / RS-232C *Switch-selectable between transmitter and receiver
      • Connector: Terminal block (3-pin)
    • 1 port / LAN (8 connections)
      • 10Base-T (Auto neg.), 100Base-TX (Auto neg.), Auto MDI/MDI-X
      • Connector: RJ-45
    • Remote input 1 for external key switch
    • Remote input 2 for emergency broadcast
    • 2 portq / RS-232C *Switch-selectable between transmitter and receiver
      • Connector: Terminal block (3-pin)
    • 1 port / LAN (8 connections)
      • 10Base-T (Auto neg.), 100Base-TX (Auto neg.), Auto MDI/MDI-X
      • Connector: RJ-45
    • 6 ports / Contact closure
      • Non-voltage contact input up to DC 24 V 500 mA
      • Connector: Terminal block (6-pin)
    • Remote out for power distributor
    • PJLink (class1)
    • CEC (power control of sink device) (*5)
    Other Info
    • Power: 100-240 VAC ± 10 %, 50 Hz / 60 Hz ± 3 Hz
    • Power consumption: TBD
    • Dimensions: 16.9 (W) × 3.4 (H) × 13.8 (D)” / 430 (W) × 88 (H) × 350 (D) mm
      • EIA full rack wide, 2U high (Excluding connectors and the like)
    • Weight: TBD
    • Temperature
      • Operating: 32 °F to 104 °F / 0° C to + 40 °C
      • Storage: -4 °F to + 176 °F / -20° C to + 80 °C
    • Humidity: Operating / Storage 20 % to 90 % (non-condensing)
    • (*1) 30 bit / pixel (10 bit / component) Deep Color is supported while x.v.Color, 3D, ARC and HEC are not supported.
    • (*2) RJ-45 (HDBaseT connector) is only for extending digital video and audio signals over a Cat5e / Cat6 twisted pair cable. Use it with IDK’s twisted pair cable transmitter or receiver. Do not use for LAN devices.
    • (*3) The maximum cable distance varies depending on the connected devices and was measured under following conditions:
      • 1080p@60: when IDK’s AWG 24 cable was used and signals of 1080p@60 24 bit / pixel (8 bit / component) was input or output.
    • (*4) The maximum cable distance varies depending on the connected devices and was measured using IDK’s CAT.5E HDC cable.
    • (*5) The sink device must support CEC. Some sink devices cannot be controlled from the MSD through CEC.