Print
StatusModel numberDescription
AvailableMSD-V42UStandard model
AvailableMSD-V42UCSDVoE Output model
AvailableMSD-V42UTHDBaseT Output model
The MSD-V4 series is a digital presentation switcher with built-in scalers and scan converters capable of sending and receiving UHD video resolutions.
With four (4) HDMI/DVI video inputs, the series can accept a wide variety of video formats. Input video signals are output as HDMI signals at up to 4K@60 (4:4:4). The MSD-V41UC/V42UC and MSD-V41UT/V42UT distribute signals in HDMI format and either 10GbE (SDVoE) or HDBaseT simultaneously.

With four (4) HDMI and one (1) analog audio inputs, input audio signals are distributed in digital audio and analog audio simultaneously.

The MSD-V4 series can be configured remotely using RS-232C or LAN. External devices can be controlled via RS-232C, LAN, CEC, or contact closure by registering control commands.
MSD-V42UMSD-V42UCMSD-V42UT
Video/Audio inputHDMI4 inputs
HDMI/DVI 1.0 TMDS single link, HDCP 1.4/2.2
TMDS clock: Up to 300 MHz, TMDS data rate: Up to 18 Gbps
Deep Color
640x480@60 to 2560x1600@60 Reduced Blanking
480p, 576p to 3840x2160@24/25/30/50/59.94/60 (4:4:4), 3840x2160@50/59.94/60 (4:2:0),
　　　　　　4096x2160@24/25/30/50/59.94/60 (4:4:4), 4096x2160@50/59.94/60 (4:2:0)
Color depth: 24/30 bits
*For all supported video signals, see the table below.
LPCM: Up to 8 channels
Sampling frequency: 32/44.1/48/88.2/96/176.4/192 kHz
Reference level: -20 dBFS, Max. input level: 0 dBFS
CEC
Connector: HDMI Type A (19-pin)
Maximum distances: 98 ft. (30 m) (1080p@60), 39 ft. (12 m) (4K@60)
Analog audio1 input
Stereo LR
Input impedance: 24 kΩ unbalanced
Reference level: -10 dBu, Max. input level: +10 dBu
Connector: Captive screw (3-pin)
Video/Audio outputHDMI2 outputs
－Distribute HDMI/10GbE
simultaneously		Distribute HDMI/HDBaseT
simultaneously
HDMI/DVI 1.0 TMDS single link, HDCP 1.4/2.2
TMDS clock: Up to 297 MHz, TMDS data rate: Up to 17.82 Gbps
Deep Color
1024x768@60 to 2560x1600@60 Reduced Blanking
480p, 576p to 3840x2160@24/25/30/50/59.94/60 (4:4:4), 3840x2160@50/59.94/60 (4:2:0),
　　　　　　4096x2160@24/25/30/50/59.94/60 (4:4:4), 4096x2160@50/59.94/60 (4:2:0)
Color depth: 24/30 bits
*For all supported video signals, see the table below.
LPCM: Up to 8 channels
Sampling frequency: 32/44.1/48/88.2/96/192 kHz
Reference level: -20 dBFS, Max. output level: 0 dBFS
CEC
Connector: HDMI Type A (19-pin)
Maximum distances: 98 ft. (30 m) (1080p@60), 39 ft. (12 m) (4K@60)
10GbE－2 outputs－
－Distribute HDMI/10GbE
simultaneously		－
SDVoE, AES-128
Deep Color
*Supported video signals are the same as those of HDMI.
RS-232C/LAN
Connector: RJ-45
Maximum distance: 328 ft. (100 m)
Cable: CAT6A (STP)
HDBaseT－－2 outputs
－－Distribute HDMI/HDBaseT
simultaneously
HDBaseT, HDCP 1.4/2.2
Deep Color
1024x768@60 to 2560x1600@60 Reduced Blanking
480p, 576p to 3840x2160@24/25/30 (4:4:4), 3840x2160@50/59.94/60 (4:2:0),
　　　　　　4096x2160@24/25/30 (4:4:4), 4096x2160@50/59.94/60 (4:2:0)
Color depth: 24/30 bits
*For all supported video signals, see the table below.
*Supported audio signals are the same as those of HDMI.
RS-232C/LAN/CEC
Connector: RJ-45
Maximum distance: 328 ft. (100 m)/492 ft. (150 m) (Long reach mode is used)
Cable: CAT.5E HDC, CAT5e (UTP/STP), CAT6 (UTP/STP)
Analog audio1 output
Stereo L/R
Output impedance: 50 Ω unbalanced
Reference level: -10 dBu, Max. output level: +10 dBu
Connector: Captive screw (3-pin)
Control I/FRS-232C1 port/Connector: Captive screw (3-pin)
LAN1 port/10Base-T/100Base-TX (Auto Negotiation), Auto MDI/MDI-X, Connector: RJ-45
Contact closure3 ports/Dry-contact closure input up to DC 24 V 1 A, Connector: Captive screw (6-pin)
FunctionsVideoResolution conversion, Frame rate conversion, Seamless switching with one black frame,
Picture adjustment, Image quality adjustment, Two video combinations,
User provided bitmap image display, Each video output OFF, Built-in library of test patterns
AudioVolume level adjustment (Input/Output), Embedding, De-embedding, Audio Downmix, Lip Sync, Test tone
ControlWEB browser, External command execution (64 individual commands), PJLink controller (Class1),
CEC (Power control of sink device), LAN through (Connector: LAN/10GbE/HDBaseT),
CEC through (Connector: HDMI/HDBaseT), Unsolicited notification
OthersAudio breakaway for independent audio and video switching, Automatic input switching,
EDID emulation, Audio input enable/disable, HDCP input enabling/disabling, Status display,
System check, Crosspoint memory (9 settings), Preset memory (9 settings), Pattern memory (5 settings),
Last memory, Anti-Snow, Connection Reset, Button security lockout, Standby switch
GeneralPowerDC 12 V 2.6 ADC 12 V 3.8 ADC 12 V 3.3 A
AC adapter: 100 - 240 VAC ±10%, 50 Hz/60 Hz ±3 Hz, DC 12 V 5 A 60.0 W
Power consumption35 W51 W44 W
Dimensions8.3 (W) × 1.7 (H) × 9.8 (D)” (210 (W) × 42 (H) × 250 (D) mm) (Excluding connectors and the like)
Weight4 lbs. (1.8 kg)4.2 lbs. (1.9 kg)4 lbs. (1.8 kg)
TemperatureOperating: 32°F to 104°F (0°C to +40°C), Storage: -4°F to +176°F (-20°C to +80°C)
Humidity20% to 90% (Non Condensing)
* Specifications are subject to change without notice.
  For the latest specification, please see product specification in PDF format.
MSD-V4UC / MSD-V4UT
1:59
MSD-V40U Series
2:03
ISE 2022: MSD-V Series
0:44
InfoComm 2022: MSD-V42UC
0:59
Technical documentsVersionSizeFormat
Spec sheet MSD-V42U Ver.2.0.01.3 MBPDF
User guide MSD-V42U Ver.2.4.02.2 MBPDF
Operation guide MSD-V42U Ver.2.3.011.0 MBPDF
Command guide MSD-V42U Ver.1.5.00.9 MBPDF
Dimensional outline drawing MSD-V42U 0.9 MBPDF
Dimensional outline drawing MSD-V42U 0.5 MBDXF
Dimensional outline drawing MSD-V42UC 1.0 MBPDF
Dimensional outline drawing MSD-V42UC 0.5 MBDXF
Dimensional outline drawing MSD-V42UT 1.0 MBPDF
Dimensional outline drawing MSD-V42UT 0.5 MBDXF
Frame diagram MSD-V42U 0.2 MBDXF/DWG
Frame diagram MSD-V42UC 0.2 MBDXF/DWG
Frame diagram MSD-V42UT 0.2 MBDXF/DWG
Software Terms and Conditions of Use

In terms of software downloaded from this website and the contents such as documents and images embedded in or generated by the software (“Software”), IDK grants you a non-transferable, non-exclusive license to use the Software free of charge. IDK does not transfer any right and benefit, including but not limited to any intellectual property to you. Copyrights to the Software shall remain the property of IDK and/or the respective rights holders that have given usage permission to IDK. You are not permitted to retransmit, sell, modify, decompile, disassemble, reverse-engineer or in any way obtain the source code of the Software.
IDK does not make any warranty regarding the Software. In no event shall IDK be liable to you or any third party for any damages (general, direct, indirect, special, incidental or consequential) arising out of the use of or inability to use the Software.
IDK will not answer any inquiries regarding the Software and may suspend or stop providing the Software without notice.

Software Terms and Conditions of Use

In terms of software downloaded from this website and the contents such as documents and images embedded in or generated by the software (“Software”), IDK grants you a non-transferable, non-exclusive license to use the Software free of charge. IDK does not transfer any right and benefit, including but not limited to any intellectual property to you. Copyrights to the Software shall remain the property of IDK and/or the respective rights holders that have given usage permission to IDK. You are not permitted to retransmit, sell, modify, decompile, disassemble, reverse-engineer or in any way obtain the source code of the Software.
IDK does not make any warranty regarding the Software. In no event shall IDK be liable to you or any third party for any damages (general, direct, indirect, special, incidental or consequential) arising out of the use of or inability to use the Software.
IDK will not answer any inquiries regarding the Software and may suspend or stop providing the Software without notice.

Application softwareVersionSizeFormat
Control Command Configuration Tool Windows 10 (32/64bit)
Microsoft .NET Framework 4.6.2 or later		Ver.1.8.02.2 MBZIP
Multi Switcher Configurator Windows 10 (32/64bit)
ASP.NET Core Runtime (x86) 6 or later
.NET Desktop Runtime (x86) 6 or later
For installing ASP.NET Core Runtime, refer to the installation guide in the Zip file.
Ver.2.5.141.2 MBZIP
Options
Related products
Series products
Description
The MSD-V4 series is a digital presentation switcher with built-in scalers and scan converters capable of sending and receiving UHD video resolutions.
With four (4) HDMI/DVI video inputs, the series can accept a wide variety of video formats. Input video signals are output as HDMI signals at up to 4K@60 (4:4:4). The MSD-V41UC/V42UC and MSD-V41UT/V42UT distribute signals in HDMI format and either 10GbE (SDVoE) or HDBaseT simultaneously.

With four (4) HDMI and one (1) analog audio inputs, input audio signals are distributed in digital audio and analog audio simultaneously.

The MSD-V4 series can be configured remotely using RS-232C or LAN. External devices can be controlled via RS-232C, LAN, CEC, or contact closure by registering control commands.
Close
Specifications [PDF]
Videos
MSD-V4UC / MSD-V4UT
1:59
MSD-V40U Series
2:03
ISE 2022: MSD-V Series
0:44
InfoComm 2022: MSD-V42UC
0:59
Close
Diagrams
Download
Technical documents
Application software
    Software Terms and Conditions of Use

    In terms of software downloaded from this website and the contents such as documents and images embedded in or generated by the software (“Software”), IDK grants you a non-transferable, non-exclusive license to use the Software free of charge. IDK does not transfer any right and benefit, including but not limited to any intellectual property to you. Copyrights to the Software shall remain the property of IDK and/or the respective rights holders that have given usage permission to IDK. You are not permitted to retransmit, sell, modify, decompile, disassemble, reverse-engineer or in any way obtain the source code of the Software.
    IDK does not make any warranty regarding the Software. In no event shall IDK be liable to you or any third party for any damages (general, direct, indirect, special, incidental or consequential) arising out of the use of or inability to use the Software.
    IDK will not answer any inquiries regarding the Software and may suspend or stop providing the Software without notice.

  • Control Command Configuration Tool(ZIP) Windows 10 (32/64bit)
    Microsoft .NET Framework 4.6.2 or later
    • Software Terms and Conditions of Use

    In terms of software downloaded from this website and the contents such as documents and images embedded in or generated by the software (“Software”), IDK grants you a non-transferable, non-exclusive license to use the Software free of charge. IDK does not transfer any right and benefit, including but not limited to any intellectual property to you. Copyrights to the Software shall remain the property of IDK and/or the respective rights holders that have given usage permission to IDK. You are not permitted to retransmit, sell, modify, decompile, disassemble, reverse-engineer or in any way obtain the source code of the Software.
    IDK does not make any warranty regarding the Software. In no event shall IDK be liable to you or any third party for any damages (general, direct, indirect, special, incidental or consequential) arising out of the use of or inability to use the Software.
    IDK will not answer any inquiries regarding the Software and may suspend or stop providing the Software without notice.

  • Multi Switcher Configurator(ZIP) Windows 10 (32/64bit)
    ASP.NET Core Runtime (x86) 6 or later
    .NET Desktop Runtime (x86) 6 or later
    For installing ASP.NET Core Runtime, refer to the installation guide in the Zip file.
Close
Options
Related products
Series products