Status | Model number |
---|---|
Available | MSD-701AMP |
The MSD-701AMP is a seven-input digital presentation switcher with built-in audio power amplifier.
The seven digital and two analog inputs accept a wide variety of video formats including HDMI, DVI, HDBaseT, Composite video, RGB, and YPbPr. Input video signals are converted to HDBaseT and HDMI signals at up to QWXGA or 1080p. Two selected input video signals can be displayed on a single screen in picture-in-picture or side-by-side layout.
Up to three audio can be mixed: one of digital audio/analog audio, one mic, and one line. Audio is output to digital connectors, an analog connector, and two speakers. Enhanced audio features include compressing, limiter, and seven-band equalizer for mic input and tone controls for speaker output.
The MSD-701AMP can be configured remotely from RS-232C and LAN. External devices can be controlled via RS-232C, LAN, CEC, or contact closure by registering control commands.
Additionally, the MSD-701AMP includes key security lockout and button caps to prevent accidental or inappropriate changes.
The seven digital and two analog inputs accept a wide variety of video formats including HDMI, DVI, HDBaseT, Composite video, RGB, and YPbPr. Input video signals are converted to HDBaseT and HDMI signals at up to QWXGA or 1080p. Two selected input video signals can be displayed on a single screen in picture-in-picture or side-by-side layout.
Up to three audio can be mixed: one of digital audio/analog audio, one mic, and one line. Audio is output to digital connectors, an analog connector, and two speakers. Enhanced audio features include compressing, limiter, and seven-band equalizer for mic input and tone controls for speaker output.
The MSD-701AMP can be configured remotely from RS-232C and LAN. External devices can be controlled via RS-232C, LAN, CEC, or contact closure by registering control commands.
Additionally, the MSD-701AMP includes key security lockout and button caps to prevent accidental or inappropriate changes.
Item | Description | |
---|---|---|
Video input | HDMI/DVI | 7 inputs ・Switch-selectable between HDBaseT and HDMI/DVI /DVI 1.0 ・TMDS single link, HDCP 1.4 TMDS clock: 25 MHz to 225 MHz, TMDS data rate: 0.75 Gbps to 6.75 Gbps Built-in cable EQ, EDID emulation, CEC (HDMI connector only) Connector: 5 female HDMI Type A (19-pin), 2 female DVI-I (29-pin) |
HDBaseT | 1 input Switch-selectable between HDBaseT and HDMI/DVI HDCP 1.4 EDID emulation, RS-232C, LAN, CEC, PoH power supply (IEEE 802.3af) Connector: RJ-45 Cable ・CAT.5E HDC, Cat5e UTP/STP, Cat6 UTP/STP (T568A/T568B straight-through) ・ For PoH power feeding, please use a 24 AWG category cable or thicker cable. | |
Universal Analog | 2 inputs Switch-selectable between digital and analog Composite video/ Y/C/Analog RGB/Analog YPbPr (Auto-recognition) Composite video ・1.0 V[p-p]/75 Ω Y/C ・1.0 V[p-p](Y)/0.286 V[p-p](C)/75 Ω Analog RGB ・0.7 V[p-p](1.0 V[p-p] Sync on Green)/75 Ω ・HS/VS TTL level, CS TTL level, Sync on Green Analog YPbPr ・1.0 V[p-p](Y)/0.7 V[p-p](Pb/Pr)/75 Ω EDID emulation Connector: 2 female DVI-I (29-pin) | |
Format | HDMI/DVI/HDBaseT : VGA to QWXGA (Dot clock: 25 MHz to 165 MHz) For WUXGA/QWXGA, only Reduced Blanking is supported. 480i / 480p / 576i / 576p / 720p / 1080i / 1080p | |
Universal Analog : VGA to QWXGA (Dot clock: 25 MHz to 165 MHz) For WUXGA/QWXGA, only Reduced Blanking is supported. NTSC / PAL 480i / 480p / 576i / 576p / 720p / 1080i / 1080p | ||
Audio input | Digital | 7 inputs Switch-selectable between HDBaseT and HDMI/DVI (IN5 only) Multi-channel LPCM up to 8 channels Sampling frequency: 32 kHz to 192 kHz, Sample size: 16 bit to 24 bit Reference level: -20 dBFS, Max. input level: 0 dBFS Connector: 5 female HDMI Type A (19-pin), 1 RJ-45, 2 female DVI-I (29-pin) |
Analog | 3 inputs Balanced/Unbalanced Stereo LR Input impedance: 48 kΩ balanced/24 kΩ unbalanced Reference level: -10 dBu, Max. input level: +10 dBu Connector: 3 captive screw (5-pin) | |
Line | 1 input Balanced/Unbalanced Stereo LR Input impedance: 48 kΩ balanced/24 kΩ unbalanced Reference level: 0 dBu to -40 dBu, Max. input level: +10 dBu Connector: Captive screw (5-pin) | |
Mic | 1 input Balanced/Unbalanced Mono Input impedance: 10 kΩ or more Reference level: 0 dBu to -60 dBu, Max. input level: +10 dBu Connector: Captive screw (3-pin) | |
Video output | HDMI/DVI | 2 outputs Video can be distributed to HDMI/DVI outputs and an HDBaseT output simultaneously. HDMI Deep Color /DVI 1.0 TMDS single link, HDCP 1.4 TMDS clock: 27 MHz to 202.5 MHz, TMDS data rate: 0.81 Gbps to 6.075 Gbps Built-in cable EQ, CEC Connector: 2 female HDMI Type A (19-pin) |
HDBaseT | 1 output Video can be distributed to HDMI/DVI outputs and an HDBaseT output simultaneously. HDBaseT HDCP 1.4 RS-232C, LAN, CEC Connector: RJ-45 (*2) Cable: CAT.5E HDC, Cat5e UTP/STP, Cat6 UTP/STP (T568A/T568B straight-through) | |
Format | VGA / XGA / WXGA (1280x768) / WXGA (1280x800) / Quad-VGA / SXGA / WXGA (1360x768) / WXGA (1366x768) / SXGA+ / WXGA+ / WXGA++ / UXGA / WSXGA+ / VESAHD / WUXGA / QWXGA For VESAHD/WUXGA/QWXGA, only Reduced Blanking is supported. 480p /576p / 720p / 1080i / 1080p | |
Audio output | Digital | 3 outputs Audio can be distributed to HDMI/DVI outputs and an HDBaseT output simultaneously Multi-channel LPCM up to 8 channels Sampling frequency: 32 kHz to 192 kHz, Sample size: 16 bit to 24 bit Reference level: -20 dBFS, Max. output level: 0 dBFS Connector: 2 female HDMI Type A (19-pin), RJ-45 |
Analog | 1 output Balanced/Unbalanced Stereo LR Output impedance: 100 Ω balanced/50 Ω unbalanced Reference level: -10 dBu, Max. output level: +10 dBu Connector: Captive screw (5-pin) | |
Speaker output 1 | 1 output Stereo LR Load impedance: 4 Ω to 16 Ω, 100 W + 100 W (4 Ω 1 kHz) Connector: Captive screw (4-pin) (5.08 mm) | |
Speaker output 2 | 1 output Switch-selectable between Stereo LR and Mono (High-impedance output) [Stereo LR] ・Load impedance: 4 Ω to 16 Ω, 100 W + 100 W (4 Ω 1 kHz) ・Connector: Captive screw (4-pin) (5.08 mm) [Mono] ・High-impedance output ・Load impedance: 200 Ω to 10 kΩ, 50 W (200 Ω 100 V line) ・Connector: Captive screw (2-pin) (5.08 mm) | |
Maximum transmission distances | Digital input | HDMI/DVI : 98 ft. |
Digital output | HDMI/DVI : 164 ft. | |
Control | RS-232C | 2 ports/captive screw (3-pin) |
LAN | 1 port/RJ-45 10Base-T/100Base-TX (Auto Negotiation), Auto MDI/MDI-X | |
Contact closure | 6 ports/captive screw (6-pin) Non-voltage contact input up to DC 24 V 1 A | |
Remote control | Remote IN 1 : Open-circuit voltage DC 5 V, short-circuit current 0.5 mA, external button switch Remote IN 2 : Voltage detection DC 5 V to DC 30 V, Receiving emergency stop signal Remote OUT : Non-voltage contact N.C./N.O., input up to DC 24 V 1 A, power distribution unit control Connector: Captive screw (8-pin) | |
External control | RS-232C, LAN, HDBaseT, Contact closure, PJLink , CEC (Power control of sink device) (*10) | |
Functions | Video | Motion adaptive interlaced/progressive conversion, Aspect ratio control, Picture adjustment (brightness, contrast, image position, image size, etc.), Seamless Switching, Two video combinations: PinP and side-by-side, Pattern memory (5 settings), Each video output OFF |
Audio | Input level offset control, Output level control, Mic/Line level control, Source volume control, Lip Sync (Max. 256 ms.), Audio Downmix, Audio mixing, Compressor, Limiter, 7-band equalizer, Tone control, Automatic feedback suppressor | |
Others | WEB browser control, Input channel automatic switching, Audio breakaway for independent audio and video switching, Crosspoint memory , External control commands (32 commands), Button security lockout, System check, Standby switch | |
General | Power | 100 - 240 VAC ± 10%, 50 Hz/60 Hz ± 3 Hz |
Power consumption | About 108 Watts (1/8 MAX power) | |
Dimensions | 16.9 × 3.5 × 13.8” (430 (W) × 88 (H) × 350 (D) mm) (2U high) (Excluding connectors and the like) | |
Weight | 17 lbs. (7.7 kg) | |
Temperature | Operating : 32°F to 104°F (0°C to +40°C) Storage : -4°F to +176°F (-20°C to +80°C) | |
Humidity | Operating/Storage: 20% to 90% (Non Condensing) |
* Specifications are subject to change without notice.
For the latest specification, please see product specification in PDF format.
For the latest specification, please see product specification in PDF format.
MSD-701AMP
1:00ISE 2020: MSD-701AMP
1:08Technical documents | Version | Size | Format |
---|---|---|---|
Spec sheet MSD-701AMP | Ver.1.2.0 | 0.3 MB | |
User guide MSD-701AMP | Ver.1.6.0 | 2.9 MB | |
Command guide MSD-701AMP | Ver.1.5.0 | 1.4 MB | |
Dimensional outline drawing MSD-701AMP | 0.8 MB | ||
Dimensional outline drawing MSD-701AMP | 0.6 MB | DXF | |
Frame diagram MSD-701AMP | 0.4 MB | DXF/DWG |
Application software | Version | Size | Format |
---|---|---|---|
Control Command Configuration Tool Windows 10 (32/64bit) Microsoft .NET Framework 4.6.2 or later | Ver.1.8.0 | 2.2 MB | ZIP |
Multi Switcher Configurator Windows 10 (32/64bit) Microsoft .NET Framework 4.6.2 or later | Ver.1.0.0 | 8.3 MB | ZIP |
EDID Configuration Tool Windows 10 (32/64bit) .NET 6 or later | Ver.1.2.0 | ZIP |
Description Specifications [PDF] Videos
Options Related products
The MSD-701AMP is a seven-input digital presentation switcher with built-in audio power amplifier.
The seven digital and two analog inputs accept a wide variety of video formats including HDMI, DVI, HDBaseT, Composite video, RGB, and YPbPr. Input video signals are converted to HDBaseT and HDMI signals at up to QWXGA or 1080p. Two selected input video signals can be displayed on a single screen in picture-in-picture or side-by-side layout.
Up to three audio can be mixed: one of digital audio/analog audio, one mic, and one line. Audio is output to digital connectors, an analog connector, and two speakers. Enhanced audio features include compressing, limiter, and seven-band equalizer for mic input and tone controls for speaker output.
The MSD-701AMP can be configured remotely from RS-232C and LAN. External devices can be controlled via RS-232C, LAN, CEC, or contact closure by registering control commands.
Additionally, the MSD-701AMP includes key security lockout and button caps to prevent accidental or inappropriate changes. Close
The seven digital and two analog inputs accept a wide variety of video formats including HDMI, DVI, HDBaseT, Composite video, RGB, and YPbPr. Input video signals are converted to HDBaseT and HDMI signals at up to QWXGA or 1080p. Two selected input video signals can be displayed on a single screen in picture-in-picture or side-by-side layout.
Up to three audio can be mixed: one of digital audio/analog audio, one mic, and one line. Audio is output to digital connectors, an analog connector, and two speakers. Enhanced audio features include compressing, limiter, and seven-band equalizer for mic input and tone controls for speaker output.
The MSD-701AMP can be configured remotely from RS-232C and LAN. External devices can be controlled via RS-232C, LAN, CEC, or contact closure by registering control commands.
Additionally, the MSD-701AMP includes key security lockout and button caps to prevent accidental or inappropriate changes. Close
Diagrams Download
Technical documents
- Spec sheet(PDF) MSD-701AMP
- User guide(PDF) MSD-701AMP
- Command guide(PDF) MSD-701AMP
- Dimensional outline drawing(PDF) MSD-701AMP
- Dimensional outline drawing(DXF) MSD-701AMP
- Frame diagram(DXF/DWG) MSD-701AMP
Application software
- Control Command Configuration Tool(ZIP) Windows 10 (32/64bit)
Microsoft .NET Framework 4.6.2 or later - Multi Switcher Configurator(ZIP) Windows 10 (32/64bit)
Microsoft .NET Framework 4.6.2 or later - EDID Configuration Tool(ZIP) Windows 10 (32/64bit)
.NET 6 or later
Options Related products
Series products