TOP > Products > Switchers > Switchers > IMP-S41U

Print

4K@60 HDMI Switcher IMP-S41U

  • 4 inputs and 1 output
  • Up to 4K@60 (4:4:4)
  • HDCP 1.4/2.2
  • Automatic input detection and switching
  • Sequential input switching
  • Control from external controller
  • De-embedding analog audio
StatusModel number
AvailableIMP-S41U
The IMP-S41U is an HDCP 2.2-compliant 4K@60 HDMI switcher with four inputs and one output.
Digital audio of selected input channel can be de-embedded to analog audio.
The switcher also includes RS-232C and LAN as communication ports that offer remote setting from WEB browser or control commands. Additionally, contact inputs/tally outputs enable the IMP-S41U to be controlled from the PC I/O board and a control box.
ItemDescription
Input4 inputs
HDMI/DVI 1.0
TMDS single link, HDCP 1.4/2.2
x.v.Color/3D /CEC (Pass-through)/HDR
ARC/HEC are not supported.
Connector: 4 female HDMI Type A (19-pin)
Output1 output
HDMI/DVI 1.0
TMDS single link, HDCP 1.4/2.2
x.v.Color/3D /CEC (Pass-through)/HDR
ARC/HEC are not supported.
Connector: 1 female HDMI Type A (19-pin)
FormatVGA to 4K
480i / 480p / 576i / 576p / 720p / 1080i / 1080p / 4K
For 4K formats, 24 Hz/25 Hz/30 Hz/50 Hz (4:4:4)/60 Hz (4:4:4) are supported.
Color depth24 bit, 30 bit, 36 bit Deep Color
For 4K@50/59.94/60 RGB/YCbCr 4:4:4, 24 bit is supported.
Dot clock25 MHz to 600 MHz
TMDS clock25 MHz to 300 MHz
TMDS data rate0.75 Gbps to 18 Gbps
Plug & PlayDDC2B (can be selected from Built-in EDID, Copied EDID, or EDID of connected monitor)
Built-in EDID: The maximum resolution can be selected.
Digital audio inputMulti-channel LPCM up to 8 channels
Sampling frequency: 32 kHz to 192 kHz, Sample size: 16 bit to 24 bit
Reference level: -20 dBFS, Max. input level: 0 dBFS
Digital audio outputMulti-channel LPCM up to 8 channels
Sampling frequency: 32 kHz to 192 kHz, Sample size: 16 bit to 24 bit
Reference level: -20 dBFS, Max. output level: 0 dBFS
Analog audio output1 output
Balanced/Unbalanced Stereo LR
Balanced
Output impedance: 100 Ω, Reference level: -4 dBu, Max. output level: +16 dBu
Unbalanced
Output impedance: 50 Ω, Reference level: -10 dBu, Max. output level: +10 dBu
Connector: 1 captive screw (5-pin)
Maximum transmission distancesDigital input98 ft. (30 m) (1080p@60), 39 ft. 12 m (4K@60)
Digital output98 ft. (30 m) (1080p@60), 39 ft. 12 m (4K@60)
ControlRS-232C1 port/captive screw (3-pin)
LAN1 port/RJ-45 10Base-T/100Base-TX (Auto Negotiation), Auto MDI/MDI-X
Contact input/Tally output5 ports/captive screw (3-pin)
Contact input: Non-voltage contact (make contact) input or voltage contact output (DC 0 V to 5 V ±5%)
Tally output: Open collector output (Rated DC 48 V 1 A)
Power output1 port/captive screw (3-pin)
Pin 1: DC 5 V (300 Ω current limitation)
Pin 2: DC 5 V (75 Ω current limitation)
Pin 3: DC 5 V (Rated 500 mA)
FunctionsWEB browser control, Automatic input channel switching, Input channel sequence switching,
Audio de-embedding, DDC buffer, Last memory, Anti-Snow, Connection Reset, Button security lockout
GeneralPowerDC 5 V 1.1 A
Power consumptionAbout 7 W
Dimensions8.3 (W) × 1.7 (H) × 5.5 (D)” (210 (W) × 42 (H) × 140 (D) mm)
(Half rack wide, 1U high) (Excluding connectors and the like)
Weight2.4 lbs. (1.1 kg)
TemperatureOperating: 32°F to 104°F (0°C to +40°C)
Storage: -4°F to +176°F (-20°C to +80°C)
HumidityOperating/Storage: 20% to 90% (Non Condensing)
* Specifications are subject to change without notice.
  For the latest specification, please see product specification in PDF format.
IMP-S Series
1:56
IMP-S41U
1:36
Technical documentsVersionSizeFormat
Spec sheet IMP-S41U Ver.1.1.00.2 MBPDF
User guide IMP-S41U Ver.2.4.01.9 MBPDF
Command guide IMP-S41U Ver.2.1.00.7 MBPDF
Dimensional outline drawing IMP-S41U 0.9 MBPDF
Dimensional outline drawing IMP-S41U 0.2 MBDXF
Frame diagram IMP-S41U 0.3 MBDXF/DWG
Software Terms and Conditions of Use

In terms of software downloaded from this website and the contents such as documents and images embedded in or generated by the software (“Software”), IDK grants you a non-transferable, non-exclusive license to use the Software free of charge. IDK does not transfer any right and benefit, including but not limited to any intellectual property to you. Copyrights to the Software shall remain the property of IDK and/or the respective rights holders that have given usage permission to IDK. You are not permitted to retransmit, sell, modify, decompile, disassemble, reverse-engineer or in any way obtain the source code of the Software.
IDK does not make any warranty regarding the Software. In no event shall IDK be liable to you or any third party for any damages (general, direct, indirect, special, incidental or consequential) arising out of the use of or inability to use the Software.
IDK will not answer any inquiries regarding the Software and may suspend or stop providing the Software without notice.

Application softwareVersionSizeFormat
EDID Configuration Tool Windows 10 (32/64bit)
.NET 6 or later		Ver.1.2.0ZIP
Options
Series products
Description
The IMP-S41U is an HDCP 2.2-compliant 4K@60 HDMI switcher with four inputs and one output.
Digital audio of selected input channel can be de-embedded to analog audio.
The switcher also includes RS-232C and LAN as communication ports that offer remote setting from WEB browser or control commands. Additionally, contact inputs/tally outputs enable the IMP-S41U to be controlled from the PC I/O board and a control box.
Close
Specifications [PDF]
Videos
IMP-S Series
1:56
IMP-S41U
1:36
Close
Diagrams
Download
Technical documents
Application software
    Software Terms and Conditions of Use

    In terms of software downloaded from this website and the contents such as documents and images embedded in or generated by the software (“Software”), IDK grants you a non-transferable, non-exclusive license to use the Software free of charge. IDK does not transfer any right and benefit, including but not limited to any intellectual property to you. Copyrights to the Software shall remain the property of IDK and/or the respective rights holders that have given usage permission to IDK. You are not permitted to retransmit, sell, modify, decompile, disassemble, reverse-engineer or in any way obtain the source code of the Software.
    IDK does not make any warranty regarding the Software. In no event shall IDK be liable to you or any third party for any damages (general, direct, indirect, special, incidental or consequential) arising out of the use of or inability to use the Software.
    IDK will not answer any inquiries regarding the Software and may suspend or stop providing the Software without notice.

  • EDID Configuration Tool(ZIP) Windows 10 (32/64bit)
    .NET 6 or later
Close
Options
Series products