StatusModel number
AvailableNJR-AB08DAN
SFP+ optical transceiver
Available 10G-MM-SFPSFP+ transceiver: Multimode fiber
New SFP-L10GSRSFP+ transceiver: Multimode fiber
Available SFP-L10GLRSFP+ transceiver: Singlemode fiber
The NJR-AB08DAN transcodes audio signal directly between the IP-NINJAR and Dante protocol environments.
Audio signal transport is enabled from NJR encoders to Dante devices and from Dante device to NJR decoders.
The NJR-AB08DAN can receive up to four audio streams from IP-NINJAR encoders and output up to eight channels in Dante protocol. The bridge can also accept up to 8-channel audio from Dante sources, outputting IP-NINJAR protocol in up to four audio streams. Audio can be set from the NJR-CTB.

Please use this product with a combination of IP-NINJAR products.
ItemDescription
InputIP-NINJAR network audio1 input
Format: IP-NINJAR protocol
Sampling frequency: 44.1 kHz to 192 kHz, Sample size: 24 bit
Maximum audio stream: 4 streams
Maximum audio input channel: 8 channels
Connector: 2 LCs
Dante network audio1 input
Format: Dante protocol
Sampling frequency: 44.1 kHz to 192 kHz, Sample size: 24 bit
Maximum audio input channel: 8 channels
Connector: 2 RJ-45s (Primary/Secondary)
OutputIP-NINJAR network audio1 output
Format: IP-NINJAR protocol
Sampling frequency: 44.1 kHz to 192 kHz, Sample size: 24 bit
Maximum audio stream: 4 streams
Maximum audio output channel: 8 channels
Connector: 2 LCs
Dante network audio1 output
Format: Dante protocol
Sampling frequency: 44.1 kHz to 192 kHz, Sample size: 24 bit
Maximum audio output channel: 8 channels
Connector: 2 RJ-45s (Primary/Secondary)
Cable for extension
IP-NINJAR network audio
CableDuplex fiber cable
SFP+ optical transceiver
Transmission distancesUp to 984 ft. (300 m) (OM3 Multimode fiber),
Up to 6.21 mi. (10 km) (OS1 Singlemode fiber)
Cable for extension
Dante network audio
CableCAT.5E HDC, Cat5e UTP/STP, Cat6 UTP/STP, Cat6A UTP/STP
Transmission distancesUp to 328 ft. (100 m)
GeneralAC adapterInput: 100 - 240 VAC ± 10%, 50 Hz/60 Hz ± 3 Hz
Output: DC 12 V 3 A 36.0 W (A dedicated AC adapter is provided)
Power consumptionAbout 10 Watts
Dimensions8.3 (W) × 1.2 (H) × 3.9 (D)” (210 (W) × 30 (H) × 100 (D) mm)
(Half rack wide, thin type) (Excluding connectors and the like)
Weight1.5 lbs. (0.7 kg)
TemperatureOperating: 32°F to 104°F (0°C to +40°C)
Storage: -4°F to +176°F (-20°C to +80°C)
HumidityOperating/Storage: 20% to 90% (Non Condensing)
* Specifications are subject to change without notice.
  For the latest specification, please see product specification in PDF format.
IP-NINJAR: 160x160 AV over IP Connection Test
1:40
IP-NINJAR: Overview
1:48
ISE 2020: IP-NINJAR
1:10
Technical documentsVersionSizeFormat
Spec sheet NJR-AB08DAN Ver.1.2.00.3 MBPDF
User guide NJR-AB08DAN Ver.1.4.01.1 MBPDF
Dimensional outline drawing NJR-AB08DAN 0.7 MBPDF
Dimensional outline drawing NJR-AB08DAN 0.8 MBDXF
Frame diagram NJR-AB08DAN 0.3 MBDXF/DWG
Software Terms and Conditions of Use

In terms of software downloaded from this website and the contents such as documents and images embedded in or generated by the software (“Software”), IDK grants you a non-transferable, non-exclusive license to use the Software free of charge. IDK does not transfer any right and benefit, including but not limited to any intellectual property to you. Copyrights to the Software shall remain the property of IDK and/or the respective rights holders that have given usage permission to IDK. You are not permitted to retransmit, sell, modify, decompile, disassemble, reverse-engineer or in any way obtain the source code of the Software.
IDK does not make any warranty regarding the Software. In no event shall IDK be liable to you or any third party for any damages (general, direct, indirect, special, incidental or consequential) arising out of the use of or inability to use the Software.
IDK will not answer any inquiries regarding the Software and may suspend or stop providing the Software without notice.

Application softwareVersionSizeFormat
IP-NINJAR ConfiguratorNone
Description
The NJR-AB08DAN transcodes audio signal directly between the IP-NINJAR and Dante protocol environments.
Audio signal transport is enabled from NJR encoders to Dante devices and from Dante device to NJR decoders.
The NJR-AB08DAN can receive up to four audio streams from IP-NINJAR encoders and output up to eight channels in Dante protocol. The bridge can also accept up to 8-channel audio from Dante sources, outputting IP-NINJAR protocol in up to four audio streams. Audio can be set from the NJR-CTB.

Please use this product with a combination of IP-NINJAR products.
Close
Specifications [PDF] Videos
IP-NINJAR: 160x160 AV over IP Connection Test
1:40

IP-NINJAR: Overview
1:48

ISE 2020: IP-NINJAR
1:10

Close
Diagrams Download
Technical documents
Application software
    Software Terms and Conditions of Use

    In terms of software downloaded from this website and the contents such as documents and images embedded in or generated by the software (“Software”), IDK grants you a non-transferable, non-exclusive license to use the Software free of charge. IDK does not transfer any right and benefit, including but not limited to any intellectual property to you. Copyrights to the Software shall remain the property of IDK and/or the respective rights holders that have given usage permission to IDK. You are not permitted to retransmit, sell, modify, decompile, disassemble, reverse-engineer or in any way obtain the source code of the Software.
    IDK does not make any warranty regarding the Software. In no event shall IDK be liable to you or any third party for any damages (general, direct, indirect, special, incidental or consequential) arising out of the use of or inability to use the Software.
    IDK will not answer any inquiries regarding the Software and may suspend or stop providing the Software without notice.

  • IP-NINJAR Configurator(None)
Close

Options Related products Series products