TOP > Products > Switchers > Switchers > HDC-TR121UHD

Print

4K@60 HDBaseT Transceiver HDC-TR121UHD

  • Transceiver model
  • 2×1 switching (HDMI/HDBaseT)
  • 1×2 DA (HDMI and HDBaseT)
  • Up to 4K@60 (4:4:4)
  • HDCP 1.4/2.2
  • Up to 100 m (CAT5e/CAT6)
  • Up to 150 m (Long Reach Mode)
StatusModel number
AvailableHDC-TR121UHD
The HDC-TR121UHD is an HDBaseT extender with EDID emulator for sending HDMI, DVI, or HDBaseT input signals at up to 4K@60 over a Category cable without compression or processing.
Input video signal is converted to HDMI and HDBaseT that can be transmitted up to 100 m (328 ft.); 1080p (24 bit) video signals can be sent up to 150 m (492 ft.) in Long reach mode. The HDMI OUT1 enables down conversion outputting 4K input video at 1080p automatically depending on sink device status. The two video inputs can be controlled by the front panel or an external controller. For video signal that is distributed to an HDMI/DVI and HDBaseT simultaneously, video/audio can be off for each output.
The HDC-TR121UHD also features Daisy chain for extending and distributing video, audio, and control signals. In addition, digital audio signals can be de-embedded onto the analog output signals. It supports bidirectional RS-232C communication and LAN transmission.
Internal Web pages provide system status for troubleshooting and device monitoring using a browser
ItemDescription
Input2 inputs
Output2 outputs
InputHDMI/DVI1 input
HDMI /DVI 1.0
TMDS single link, HDCP 1.4/2.2
HDR , 3D , x.v.Color
EDID emulation, CEC (Pass-through)
Connector: Female HDMI Type A (19-pin)
HDBaseT1 input
HDBaseT
HDCP 1.4/2.2, HDR , 3D , x.v.Color
EDID emulation, RS-232C, LAN
Connector: RJ-45
Cable: CAT.5E HDC, Cat5e UTP/STP, Cat6 UTP/STP (T568A/T568B straight-through)
OutputHDMI/DVI1 output Output video can be distributed to an HDMI/DVI and HDBaseT simultaneously.
HDMI /DVI 1.0
TMDS single link, HDCP 1.4/2.2
HDCP 1.4/2.2, HDR , 3D , x.v.Color, CEC (Pass-through)
Connector: Female HDMI Type A (19-pin)
HDBaseT1 output Output video can be distributed to an HDMI/DVI and HDBaseT simultaneously.
HDBaseT
HDCP 1.4/2.2, HDR , 3D , x.v.Color, RS-232C, LAN
Connector: RJ-45
Cable: CAT.5E HDC, Cat5e UTP/STP, Cat6 UTP/STP (T568A/T568B straight-through)
FormatHDMI/DVIVGA to 4K
480i / 480p / 576i / 576p / 720p / 1080i / 1080p / 4K (up to 4K@60 (4:4:4))
HDBaseTVGA to 4K
　For WQHD/WQXGA, only Reduced Blanking is supported.
480i / 480p / 576i / 576p / 720p / 1080i / 1080p / 4K (up to 4K@60 (4:2:0))
Color depthHDMI24 bit, 30 bit, 36 bit Deep Color
HDBaseT24 bit, 30 bit, 36 bit Deep Color
Dot clock25 MHz to 600 MHz
TMDS clock25 MHz to 300 MHz
TMDS data rate0.75 Gbps to 18 Gbps
Digital audio input2 inputs
Multi-channel LPCM up to 8 channels
Sampling frequency: 32 kHz to 192 kHz, Sample size: 16 bit to 24 bit
Reference level: -20 dBFS, Max. input level: 0 dBFS
Connector: Female HDMI Type A (19-pin), RJ-45
Digital audio output1 x 2 outputs
　･Audio can be distributed to an HDMI output and an HDBaseT output simultaneously.
Multi-channel LPCM up to 8 channels
Sampling frequency: 32 kHz to 192 kHz, Sample size: 16 bit to 24 bit
Reference level: -20 dBFS, Max. output level: 0 dBFS
Connector: Female HDMI Type A (19-pin), RJ-45
Analog audio output1 output
Unbalanced Stereo LR
Output impedance: 50 Ω, Reference level: -10 dBu, Max. output level: +10 dBu
Connector: Captive screw (3-pin)
Maximum transmission distancesDigital inputHDMI/DVI: 98 ft. (30 m) (1080p@60), 39 ft. (12 m) (4K@60)
HDBaseT: 328 ft. (100 m), 492 ft. (150 m) (Long reach mode is used)
Digital outputHDMI/DVI: 98 ft. (30 m) (1080p@60), 39 ft. (12 m) (4K@60)
HDBaseT: 328 ft. (100 m), 492 ft. (150 m) (Long reach mode is used)
ControlRS-232C1 port/captive screw connector (3-pin), full duplex, up to 38.4 kbps
LAN1 port/RJ-45 10Base-T/100Base-TX (Auto Negotiation), Auto MDI/MDI-X
FunctionsWEB browser control, Input channel automatic switching, Anti-snow, Connection Reset ,
Button security lockout, OUT1 supports down conversion (4K to 1080p), Status notification,
Each video output OFF, I/O signal status display, HDBaseT status display
GeneralAC adapterInput : 100 - 240 VAC ±10%, 50 Hz/60 Hz ±3 Hz
Output : DC 12 V 3 A 36.0 W (A dedicated AC adapter is provided
Power consumptionAbout 15 W
Dimensions8.3 (W) × 1.2 (H) × 7.9 (D)” (210 (W) × 30 (H) × 200 (D) mm)
(Half rack wide, thin type) (Excluding connectors and the like)
Weight2.9 lbs. (1.3 kg)
TemperatureOperating: 32°F to 104°F (0°C to +40°C)
Storage: -4°F to +176°F (-20°C to +80°C)
HumidityOperating/Storage: 20% to 90% (Non Condensing)
* Specifications are subject to change without notice.
  For the latest specification, please see product specification in PDF format.
Technical documentsVersionSizeFormat
Spec sheet HDC-TR121UHD Ver.2.0.10.3 MBPDF
User guide HDC-TR121UHD Ver.2.3.02.6 MBPDF
Command guide HDC-TR121UHD Ver.2.1.00.9 MBPDF
Dimensional outline drawing HDC-TR121UHD 0.7 MBPDF
Dimensional outline drawing HDC-TR121UHD 0.2 MBDXF
Frame diagram HDC-TR121UHD 0.2 MBDXF/DWG
Software Terms and Conditions of Use

In terms of software downloaded from this website and the contents such as documents and images embedded in or generated by the software (“Software”), IDK grants you a non-transferable, non-exclusive license to use the Software free of charge. IDK does not transfer any right and benefit, including but not limited to any intellectual property to you. Copyrights to the Software shall remain the property of IDK and/or the respective rights holders that have given usage permission to IDK. You are not permitted to retransmit, sell, modify, decompile, disassemble, reverse-engineer or in any way obtain the source code of the Software.
IDK does not make any warranty regarding the Software. In no event shall IDK be liable to you or any third party for any damages (general, direct, indirect, special, incidental or consequential) arising out of the use of or inability to use the Software.
IDK will not answer any inquiries regarding the Software and may suspend or stop providing the Software without notice.

Application softwareVersionSizeFormat
EDID Configuration Tool Windows 10 (32/64bit)
.NET 6 or later		Ver.1.2.0ZIP
Options
Related products
Series products
Description
The HDC-TR121UHD is an HDBaseT extender with EDID emulator for sending HDMI, DVI, or HDBaseT input signals at up to 4K@60 over a Category cable without compression or processing.
Input video signal is converted to HDMI and HDBaseT that can be transmitted up to 100 m (328 ft.); 1080p (24 bit) video signals can be sent up to 150 m (492 ft.) in Long reach mode. The HDMI OUT1 enables down conversion outputting 4K input video at 1080p automatically depending on sink device status. The two video inputs can be controlled by the front panel or an external controller. For video signal that is distributed to an HDMI/DVI and HDBaseT simultaneously, video/audio can be off for each output.
The HDC-TR121UHD also features Daisy chain for extending and distributing video, audio, and control signals. In addition, digital audio signals can be de-embedded onto the analog output signals. It supports bidirectional RS-232C communication and LAN transmission.
Internal Web pages provide system status for troubleshooting and device monitoring using a browser
Close
Specifications [PDF]
Diagrams
Download
Technical documents
Application software
    Software Terms and Conditions of Use

    In terms of software downloaded from this website and the contents such as documents and images embedded in or generated by the software (“Software”), IDK grants you a non-transferable, non-exclusive license to use the Software free of charge. IDK does not transfer any right and benefit, including but not limited to any intellectual property to you. Copyrights to the Software shall remain the property of IDK and/or the respective rights holders that have given usage permission to IDK. You are not permitted to retransmit, sell, modify, decompile, disassemble, reverse-engineer or in any way obtain the source code of the Software.
    IDK does not make any warranty regarding the Software. In no event shall IDK be liable to you or any third party for any damages (general, direct, indirect, special, incidental or consequential) arising out of the use of or inability to use the Software.
    IDK will not answer any inquiries regarding the Software and may suspend or stop providing the Software without notice.

  • EDID Configuration Tool(ZIP) Windows 10 (32/64bit)
    .NET 6 or later
Close
Options
Related products
Series products